DB-Blue Gauge / LC-2 Kit - P/N: 3795
This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual.
DB-Red Gauge / LC-2 Kit - P/N: 3796
This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Red Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual.
DB-Blue Gauge - P/N: 3793
**Gauge Only**
This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1 or LM-2. These kits include the DB Gauge, mounting hardware, and quick-start guide.
DB-Red Gauge - P/N: 3794
**Gauge Only**
This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1 or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide.
MTX-D: MTX Digital Series Vacuum / Boost & Shift Light Gauge Kit - P/N: 3851
KEY FEATURES
•Display as either inHG/PSI or BAR (seven-segment)
•Over Boost Warning (seven-segment)
•Progressive Shift Light or Single Stage Shift Light (outer LEDs)
MTX-D: Digital Series Water Temperature & Battery Voltage Gauge Kit - P/N: 3853
KEY FEATURES
•Water Temperature
oDisplay in either degF or degC
oWater Temp Warning (seven-segment)
•Battery Voltage
oProgram exterior LED ranges vs Color
oProgram Voltage Warning (outer LEDs)
MTX-D: MTX Digital Series EGT Gauge Kit - P/N: 3854
KEY FEATURES
•Change from EGT to CHT range. CHT range allows greater resolution
•Display in either degF or degC
•Change exterior LED as a fill bar or light a single indicating LED
•Program exterior LED ranges vs Color
•Program EGT Warning.
DB-Green Gauge - P/N: 3872 Gauge only
**Gauge Only**
This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits include the DB Gauge, mounting hardware, and quick-start guide
DB-Green Gauge / LC-2 Kit - P/N: 3873
This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Green Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual.
PL-1: Pocket Logger, Innovate MTS Datalogger - P/N: 3875
The PL-1 is the latest in Innovate Motorsports’ line-up of products to allow for easy data logging of your MTS (Modular Tuning System) compatible product. Whether you have an LC-2 & SSI-4, MTX gauges, or any other combination of Innovate Motorsports MTS devices, the PL-1 integrates seamlessly to record all the data from the connected devices.
LC-2: Digital Wideband Lambda O2 Controller Kit (8 ft.) - P/N: 3877
LC-2: Complete Lambda Cable Kit (8 ft.). Includes: LC-2 Controller, Bosch Wideband O2 Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), 1" Mild-Steel Exhaust Bung, *Program Cable, & Manual.
SCG-1: Boost Controller w/Wideband Gauge Kit (ALL-IN-ONE) - P/N: 3882
The Innovate Motorsports SCG-1 is a revolutionary approach to boost control that integrates an advanced standalone boost controller with Innovate’s industry leading DirectDigital™ wideband air fuel ratio technology. When we decided to build a boost controller, we knew we had to offer more capabilities than other products available today, while still maintaining the user friendly functionality demanded by our customers. Instead of repackaging the same boost control technology that has been used for decades, we choose to pair our advanced O2 sensor control technology with our all-new, proprietary solenoid control that provides superior boost control accuracy, response and safety. We also added a user programmable shift light and housed the entire package in a compact gauge body for ease of installation and use.
LC-2: Digital Wideband Lambda O2 Controller Kit (3 ft.) - P/N: 3884
LC-2: Complete Lambda Cable Kit (3 ft.). Includes: LC-2 Controller, Bosch Wideband O2 Sensor, 3 Ft. Sensor Cable (Overall length 5 ft.), 1" Mild-Steel Exhaust Bung, *Program Cable, & Manual.
LC-2: Digital Lambda O2 Controller Kit (8 ft.) NO SENSOR - P/N: 3881
*NO O2 SENSOR OR BUNG INCLUDED*
LC-2: Complete Lambda Cable Kit (8 ft sensor cable for use with Bosch LSU 4.9 O2 Sensor.) Includes: LC-2 Controller, 8 Ft. Sensor Cable, *Program Cable, & Manual
The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes 100% digital wideband air/fuel ratio technology. The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges.
DLG-1: Dual Lambda (AFR) O2 Gauge - P/N: 3891
DLG-1: Dual Lambda (AFR) Gauge Kit - includes the DLG-1 gauge, (2) Wideband oxygen O² sensors, (2) 8 ft sensor cables, LC-2 Wideband Controller, (2) O2 sensor weld-on bungs, Black/Silver bezel, Black/White faceplate, Serial program cable, & Installation manual.
PSB-1: PowerSafe Boost & Air/Fuel Ratio Gauge - P/N: 3892
PSB-1: PowerSafe Boost & Air/Fuel Ratio Gauge Kit - includes the PSB-1 gauge, Wideband oxygen O2 sensor, 8 ft sensor cable, 4-Bar MAP Sensor, Relay, O² sensor weld-on bung, Black/Silver bezel, Black/White faceplate, Serial program cable, & Installation manual. P/N: 3892
PSN-1: PowerSafe Nitrous Pressure & Air/Fuel Ratio Gauge - P/N: 3893
PSN-1: PowerSafe Nitrous Bottle Pressure & Air/Fuel Ratio Gauge Kit - includes the PSN-1 gauge, 1500 PSI (103.42 BAR) pressure sensor, LSU 4.9 wideband oxygen O2 sensor, 8 ft sensor cable, Relay w/harness, O2 sensor weld-on bung, Black/Silver bezel, Black/White faceplate, Serial program cable, & Installation manual. P/N: 3893.
ECF-1: (FUEL) Ethanol Content & Air/Fuel Ratio Gauge P/N 3903
Four-in-one, ethanol content percentage, fuel temperature, fuel pressure, and wideband air/fuel ratio gauge
*Available for purchase with (PN 3903) or without (PN 3910) the Ethanol Content Flex Fuel Sensor (GM/Continental).
ECB-1: (BOOST) Ethanol Content & Air/Fuel Ratio Gauge P/N 3906
Four-in-one, ethanol content percentage, fuel temperature, boost pressure, and wideband air/fuel ratio gauge
*Available for purchase with (PN 3906) or without (PN 3911) the Ethanol Content Flex Fuel Sensor (GM/Continental).
MTX-D: Ethanol Content % and Fuel Temp Gauge Kit P/N 3904
Dual function, ethanol content percentage & fuel temperature gauge. Includes 2-analog outputs.
*Available for purchase with (PN 3904) or without (PN 3912) the Ethanol Content Flex Fuel Sensor (GM/Continental).
MTX-AL: Analog Series Air/Fuel Ratio Gauge - P/N: 3855
KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, LSU 4.9 Wideband O2 Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), Exhaust Bung, Program Cable (Only needed for Datalogging and Updates), and Manual.
MTX-A: Analog Series 20 PSI Vac / Boost Gauge - P/N: 3857
KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, Quick Start Installation Guide
MTX-A: Analog Series 30 PSI Vac / Boost Gauge - P/N: 3908
KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, Quick Start Installation Guide
MTX-A: Analog Series Oil or Water (Fluid) Temperature Gauge - P/N: 3861
KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), Thermistor 8 ft., Quick Start Installation Guide .
MTX-A: Analog Series Exhaust Gas Temp (EGT) Gauge - P/N: 3865
KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), EGT K-Type Probe (Stainless Steel), EGT Mounting Hardware with Bung (Optional Clamp-on Style Available P/N: 3869, not included), Quick Start Installation Guide
MTX-D: MTX Digital Series Oil Pressure & Temperature Gauge Kit - P/N: 3913
New design includes industrial grade electronic pressure sensor!
0-145 PSI (10 Bar) fuel pressure sensor (Wide range +45 PSI over prior version)
P/N: 3852 has been discontinued, Superseded by P/N: 3913.
KEY FEATURES
Pressure
Display in either PSI or BAR (seven-segment)
Program Low Oil Pressure Warning (seven-segment)
Temperature
Change exterior LED as a fill bar or light a single indicating LED
Program exterior LED ranges vs. Color
Program unit of measure as degF or degC
Program Oil Temperature Warning (outer LEDs)
MTX-D: Digital Series Fuel Pressure Gauge Kit - P/N: 3917
KEY FEATURES:
-Range 0-145 PSI (10 Bar)
-Industrial grade electronic pressure sensor
-Display in either PSI or BAR (seven-segment)
-Program Low Oil Pressure Warning
KIT INCLUDES:
-Gauge (Black Faceplate, Black Bezel)
-Silver Bezel & White Faceplate
-Program Cable (Serial)
-Electronic Pressure Sensor 0-145 PSI (10 Bar)
-Cable for Pressure Sensor
-Quick Start Installation Guide
MTX-L PLUS: Digital Air/Fuel Ratio Gauge Kit (8 Ft. Cable) - P/N: 3918
The New MTX-L PLUS wideband gauge features our patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these technologies makes the MTX-L Plus our fastest, most durable and accurate air/fuel ratio gauge ever!
• FASTER Sensor Frequency for faster O2 sensor feedback
• FASTER Analog Output Speed helps ensure that your ECU sees changes in air/fuel ratio as they happen
• ENHANCED Heater Control for superior sensor performance in forced induction and other high performance applications
• Large digital readout and programmable “Digital Needle” provides the functionality of a needle gauge with the pinpoint accuracy of a digital display
• Digital display in AFR or Lambda 52mm (2 1/6”) diameter gauge body with included interchangeable faceplates and bezels Bosch™ LSU 4.9 wideband O2 sensor Patented 100% digital wideband air/fuel ratio technology!
• Ability to calibrate O2 sensor for maximum accuracy
• Wideband O2 compatible with several fuel types
• Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels)
• Datalog using powerful LogWorks software on your PC.
MTX-L PLUS: Digital Air/Fuel Ratio Gauge Kit (3 Ft. Cable) - P/N: 3924
The New MTX-L PLUS wideband gauge features our patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these technologies makes the MTX-L Plus our fastest, most durable and accurate air/fuel ratio gauge ever!
• FASTER Sensor Frequency for faster O2 sensor feedback
• FASTER Analog Output Speed helps ensure that your ECU sees changes in air/fuel ratio as they happen
• ENHANCED Heater Control for superior sensor performance in forced induction and other high performance applications
• Large digital readout and programmable “Digital Needle” provides the functionality of a needle gauge with the pinpoint accuracy of a digital display
• Digital display in AFR or Lambda 52mm (2 1/6”) diameter gauge body with included interchangeable faceplates and bezels Bosch™ LSU 4.9 wideband O2 sensor Patented 100% digital wideband air/fuel ratio technology!
• Ability to calibrate O2 sensor for maximum accuracy
• Wideband O2 compatible with several fuel types
• Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels)
• Datalog using powerful LogWorks software on your PC.
MTX-OL PLUS: Wideband Air/Fuel OLED Gauge Kit (8 Ft. Cable) - P/N: 39350
The new MTX-OL Plus from Innovate Motorsports is the most accurate, responsive and reliable wideband AFR gauge ever built. The all-new advanced sensor control drastically increases sensor feedback frequency and optimizes heater control to set a new standard for performance in every application. The MTX-OL Plus features a vivid, high-contrast OLED display that’s easy to read and looks incredible. Innovate’s patented DirectDigital™ technology combined with a Bosch ™ LSU 4.9 wideband sensor provide category defining speed and accuracy. Interchangeable dials and bezels allows for simple cosmetic customization. An integrated serial in/out port allows for seamless integration with Innovate MTS devices and easy data logging of critical
AFR readings using the powerful free LogWorks software package.
• User configurable OLED display (AFR or Lambda)
• 52mm (2-1/16”) diameter gauge body
• Interchangeable faceplates and bezels: black and silver bezel, black and white faceplates included
• Bosch™ LSU 4.9 wideband O2 sensor
• Patented 100% digital wideband air/fuel ratio technology
• Ability to calibrate O2 sensor for maximum accuracy
• Wideband O2 compatible with several fuel types
• Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand-alone ECU’s as well as external data loggers
• Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels)
• Datalog using powerful LogWorks software on your PC
MTX-OL PLUS: Wideband Air/Fuel OLED Gauge Kit (3 Ft. Cable) - P/N: 39360
The new MTX-OL Plus from Innovate Motorsports is the most accurate, responsive and reliable wideband AFR gauge ever built. The all-new advanced sensor control drastically increases sensor feedback frequency and optimizes heater control to set a new standard for performance in every application. The MTX-OL Plus features a vivid, high-contrast OLED display that’s easy to read and looks incredible. Innovate’s patented DirectDigital™ technology combined with a Bosch ™ LSU 4.9 wideband sensor provide category defining speed and accuracy. Interchangeable dials and bezels allows for simple cosmetic customization. An integrated serial in/out port allows for seamless integration with Innovate MTS devices and easy data logging of critical
AFR readings using the powerful free LogWorks software package.
• User configurable OLED display (AFR or Lambda)
• 52mm (2-1/16”) diameter gauge body
• Interchangeable faceplates and bezels: black and silver bezel, black and white faceplates included
• Bosch™ LSU 4.9 wideband O2 sensor
• Patented 100% digital wideband air/fuel ratio technology
• Ability to calibrate O2 sensor for maximum accuracy
• Wideband O2 compatible with several fuel types
• Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand-alone ECU’s as well as external data loggers
• Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels)
• Datalog using powerful LogWorks software on your PC
SCG-1: Solenoid Boost Controller w/Wideband Gauge Kit (ALL-IN-ONE) - P/N: 3882
The Innovate Motorsports SCG-1 is a revolutionary approach to boost control that integrates an advanced standalone boost controller with Innovate’s industry leading DirectDigital™ wideband air fuel ratio technology. When we decided to build a boost controller, we knew we had to offer more capabilities than other products available today, while still maintaining the user friendly functionality demanded by our customers. Instead of repackaging the same boost control technology that has been used for decades, we choose to pair our advanced O2 sensor control technology with our all-new, proprietary solenoid control that provides superior boost control accuracy, response and safety. We also added a user programmable shift light and housed the entire package in a compact gauge body for ease of installation and use.
LM-2 Digital Air/Fuel (Single Channel O2) Ratio Meter & OBD-II/CAN Scan Tool - P/N: 3806
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug,and manual. Carrying Case also included!
LM-2 Digital Air/Fuel (Dual 2 Channel O2) Ratio Meter & OBD-II/CAN Scan Tool - P/N: 3807
The LM-2 Duo Kit (Dual Wideband O2) includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, (2) weld-in bung and plug kits, and manual. Carrying Case also included!
LM-2 (BASIC) Digital Air/Fuel Ratio Wideband Meter (1 O2 Sensor) - P/N: 3837
The new LM-2 "Basic" Kit (Single Wideband O2) ONLY includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug ,and manual.
*Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable (P/N: 3811) optional accessory. For OBD-II features you'll need the LM-2 OBD-II Cable (P/N: 3809) optional accessory. To record internally to your LM-2 you'll need the SD Card (P/N: 3787) optional accessory. This unit also comes in a cardboard box, the black hard case is an optional accessory LM-2 Carrying Case (P/N: 3836)
LM-2 Dual "BASIC" Digital Air/Fuel Ratio Wideband (2 O2 Sensor) - P/N: 3894
LM-2 Dual "BASIC" Kit includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, USB cable for PC connection, (2) weld-in bung and plug kits,and manual.
*Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable (P/N: 3811) optional accessory. For OBD-II features you'll need the LM-2 OBD-II Cable (P/N: 3809) optional accessory. To record internally to your LM-2 you'll need the SD Card (P/N: 3787) optional accessory. This unit also comes in a cardboard box, the black hard case is an optional accessory LM-2 Carrying Case (P/N: 3836)
Bosch LSU 4.2 O²Lambda Sensor -P/N: 3737
Bosch LSU 4.2 5-wire, wide-band O2 sensor. Replacement sensor for the LM-1 and LC-1.
For all other Innovate Widebands, verify which sensor is being used. The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9 but the sensor connector is different on each one. Reference the Sensor/ Sensor cable identifier image below.
Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details.
Bung & Plug Kit - P/N: 3735 Mild Steel Bung & Plug Kit.
.
Exhaust Clamp - P/N: 3728
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.
USB to Serial Adapter - P/N: 3733
Adapter for computers without Serial ports. This cable will convert Serial to USB. Hardware drivers included.
Windows 98 SE, ME, 2000, XP, Vista 32, Vista 64, 7 & 8 (with latest driver download)
Heat-Sink Bung Extender - P/N: 3729
The HBX-1 is intended to provide a degree of thermal isolation in applications where the pipe temperature exceeds 900 º F (approx. 500º C) with a heat-sinking design intended to screw into a new or existing 18mm bung.
Stainless Steel Bung Plug - P/N: 3736
Bung & Plug Kit
Stainless Steel Bung with Steel Plug
Cable (Male to Male) 4 ft. - P/N: 3760
This custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. Also used to connect the LM-1 to the XD-16.
Extended Bung & Plug (1 inch) Mild Steel - P/N: 3764
Extended Bung & Plug (1 inch / 25 mm) Mild Steel
Powersports 12mm to 18mm O2 Bung Adapter - P/N: 3835
This Stainless Steel adapter allows you to use a full size 18mm thread O2 Sensor in a 12mm Original Equipment bung. Most Import Motorcycles, ATV's etc. come with a 12mm O2 sensor. This adapter allows you to use one of Innovate's Data loggers or Gauges without the need of welding in a new Bung. This Adapter allows mounting the O2 Sensor at a 45-degree angle. The nut allows you to point the Adapter in any direction for the greatest amount of clearance. It also (not shown) comes with a copper sealing washer.
Program Cable (MTX gauges, LM-2, LC-2, SCG-1, PSB-1, PSN-1.) - P/N: 3840
The Serial Program Cable will allow you to connect the MTX series gauges, LM-2, LC-2 SCG-1, PSB-1, and PSN-1 to your PC..
Bosch LSU 4.9 O² Sensor - P/N: 3888 replacement Lambbda sensor
Bosch LSU 4.9 5-wire, wide-band O2 sensor.
Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.
NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector is different for each sensor. Reference the Sensor/ Sensor cable identifier image below.
Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details.
0-1450 PSI (100 BAR) Pressure Sensor Air/Fluid with SSI-4 PLUS Adapter - P/N 3927
Plug & Play 0-1450 PSI (100 BAR) Air/Fluid Pressure Sensor for SSI-4 PLUS.
0-150 PSI (10 BAR) Air/Fluid Pressure Sensor with SSI-4 PLUS Adapter - P/N 3926
Plug & Play 0-150 PSI (10 BAR) Air/Fluid Pressure Sensor for SSI-4 PLUS
4 BAR MAP Sensor with SSI-4 PLUS Adapter - P/N 3925
Plug & Play 4 BAR MAP Sensor for SSI-4 PLUS.
TC-4 PLUS (4-Channel Thermocouple Amplifier) - P/N: 3915
The TC-4 PLUS includes the TC-4 PLUS, Serial Program Cable, Molex to Molex Patch Cable (to daisy chain with other MTS compatible devices), and manual. P/N 3915.
SSI-4 PLUS (4 Channel Simple Sensor Interface) - P/N: 3914
The SSI-4 PLUS includes the SSI-4 PLUS, Serial Program Cable, Molex to Molex Patch Cable (to daisy chain with other MTS compatible devices), and manual. P/N 3914.
Bosch LSU 4.9 sensor and 18ft Sensor Cable bundle - P/N 3898
Compatible with the LM-2, LC-2, and MTX-L, SCG-1, PSB-1, DLG-1 and PSN-1.
Bosch LSU 4.9 sensor and 1ft Sensor Cable bundle - P/N 3898.
Bosch LSU 4.9 sensor and 8ft Sensor Cable bundle - P/N 3897
Bosch LSU 4.9 sensor and 8ft Sensor Cable bundle - P/N 3897. .
Bosch LSU 4.9 sensor and 3ft Sensor Cable bundle - P/N 3896
Bosch LSU 4.9 sensor and 3ft Sensor Cable bundle - P/N 3896.
TC-4 PLUS Bundle with (4) EGT Probes - P/N: 3895
The TC-4 PLUS bundle includes the TC-4 PLUS, Serial Program Cable, Molex to Molex Patch Cable (to daisy chain with other MTS compatible devices), 4 Type-K EGT Probes, and manual..
EGT Probe (Type K) - P/N: 3850
Includes: Weld in Stainless Steel fitting & Bung, 6ft wire.
For use with TC-4 PLUS, LMA-3, DL-32, and TC-4 (Innovate products that include a Thermocouple channel)
Carrying Case for LM-2 Digital Air/Fuel Ratio Meter - P/N: 3836
-Carrying Case for LM-2 Digital Air/Fuel Ratio Meter (Black)
-Foam insert fits LM-2 for better protection
-Innovate Motorsports Logo printed on Case
-Room to store all cables needed for the kit .
Inductive Clamp Kit (for use with LM-2) P/N: 3834
-Inductive Clamp Accessory for LM-2.
-Simply clamp on to one spark plug wire to log RPM.
-Cable is 6 feet in length.
LM-2 Window Mount - P/N: 3814
The "Window Mount" will allow you to have the LM-2 mounted to your windshield. This will help provide a better view of the display while tuning.
**LM-2 pictured....not included**
LM-2 USB Cable - P/N: 3813
Replacement USB Cable for LM-2. Included in LM-2 kits..
4 pin to 2.5mm Cable - P/N: 3812
Molex 4 pin to 2.5mm patch cable allows you to mate the newer style serial connector (Molex 4 pin) to the older style used in the LC-1, LMA-3, DL-32, SSI-4, and TC-4. This will allow you to daisy-chain multiple Innovate Motorsports devices for data logging or real-time viewing with the LogWorks software.
8 ft Cable for Bosch LSU 4.2 P/N: 3810
8 ft sensor cable for use with Bosch LSU 4.2 O² Sensor - P/N: 3810
Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.
NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector is different for each sensor. Reference the Sensor/ Sensor cable identifier image below.
Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details